Whether you are talking about a warehouse, storage facility, or factory, the accumulated foot traffic and movement of vehicles and other inventory are bound to create dirt, grime, grease, and other unsavory layers of grit on your floors, walls, and God knows where else. When talking about a factory setting, this is especially true because of the use of heavy equipment, oil, smoke, or any number of pollutants or chemicals that are used on a regular basis.
Here at EP Cleaning Solutions, we take cleaning seriously. We know that elbow grease is not all it takes. It is a combination of the right chemicals and the right power washing machinery to get things spotless and clean.
Choosing commercial power washing for your factory or industrial space has many benefits. We will cover some of those in this article.
But First, What is Power Washing?
Power washing is all in the name. With the power of pressurized water, we’re able to blast off grime, oil, dirt, and everything else under the sun. The stream of water that shoots out of the nozzle is super hot, which helps in breaking down some of the gunkier stuff.
People often get power washing and pressure washing confused. Although they are the same mechanism, the main difference lies in the fact that a power washer actually heats up the water, which makes a significant difference to how it is used. There are industrial-strength power washers and residential ones, but both use the same overall concept.
It’s important to know that professional power washing will use a variety of PSI levels to get rid of different types of stains. PSI stands for pounds per square inch. Less intense jobs will only require about 1500 PSI, while more high-grade jobs in factories and industrial centers might require up to 4000 PSI.
What kind of stains can power washing deal with?
A microscopic look at a stain will show that it is a close bond between the surface and the dirt or chemical that has clung to it. These two star-crossed lovers find a way to make it very difficult to be separated. Only the right combination of pressure and chemistry will break this bond. The process of power washing breaks the bond by forcing its way through and lifting the dirt, grease, or grime. The detergents emulsify the dirt. The higher the water’s temperature the better this process works against dirt and grease.
The right power washing, tools, and PSI will take care of the following:
Graffiti & paint
- Spray paint and graffiti will really downgrade your commercial property. This form of vandalism is also a real pain to remove. A power washer that achieves 2000 to 3000 PSI can take care of these unpleasant sights if on a concrete surface.
Gum
- If your business has a sidewalk or sees a lot of foot traffic, it might inevitably become littered with chewing gum that sticks to the ground and eventually becomes little black spots. With up to 4000 PSI, you just might get rid of these unsightly blobs.
Stains
- You can say goodbye to a variety of stains with real power washing. These can be anything from aluminum siding, wood and vinyl siding, driveways and walkways, decks, paving stones, and other materials.
Rust
- If you have some rusted-over surfaces, then 3000 PSI pressure washing may get rid of that unsightly rust.
Oil & grease
- Oil stains on driveways or warehouse floors make your residential and commercial properties seem dirty. These stains can also potentially cause your property to lose value. Power washing is the answer for getting rid of unsightly oil and grease stains in drive-thrus, factory floors, and more. In order to get rid of oil and grease, you will require at least 1700 to 3000 PSI with the right degreasing detergent.
Commercial properties and factories often have deeply embedded stains that take quite a bit of power to lift. So when it comes to industrial spaces, it’s important to do this regularly as maintenance to avoid difficulties later.
Deck stains
- When it comes to residential properties or restaurants that have decks, the stains that accumulate over time can ruin the charm of your outdoor space. With good power washing and the right PSI, you can get rid of those unwanted marks.
Calcium & lime deposits
- Fountains, pools, or other landscaping features can easily collect calcium and lime deposits. In places with hard water, these mineral deposits are even more common. These deposits can make the hard surfaces seem old and withered. Breathe new life into your property with a good power washing.
Ready to Get Your Surfaces Cleaned?
Whether you have a factory, warehouse, restaurant, or other commercial property, power washing is the solution for tough stains and grime. Don’t sit on the dirt. Get rid of it the right way with El Paso Cleaning Solutions.